Stamina 15-1100 Bedienungshandbuch

When calling for parts or service, please specify the following number :Model#: 15-1100CAUTION:Weight on this product should not exceed 300 lbs.Owner&

ASSEMBLY INSTRUCTIONS10STEP 6Bolt the HANDLEBAR SHAFTS(69) to the MAIN FRAME(1) on both sides and securely tighten.STEP 7Slide the WASHER(ø16.2xø22x

ASSEMBLY INSTRUCTIONS11STEP 8There is an “L” mark on the bottom side of the LEFT REST PEDAL(62), and an “R” mark on the bottom side of the RIGHT REST

ASSEMBLY INSTRUCTIONS12STEP 10Attach the SEAT(70) to the SEAT POST(4) with NYLOCK NUTS(M8x1.25)(92) and WASHERS(M8)(96). Insert the SEAT POST(4) into

13Place the Airgometer 1100 in the area where it will be used. It is recommended that the Airgometer 1100 be placed on an equipment mat. The Airgomete

OPERATIONAL INSTRUCTIONS14SEAT HEIGHT ADJUSTMENTProper seat height is important for efcient exercise. To determine proper seat height, sit on the Air

OPERATIONAL INSTRUCTIONSThe meter will shut off automatically after four minutes of inactivity. All function values will be kept. Press the RESET butt

The safety and integrity designed into the Airgometer 1100 can only be maintained when the Airgometer 1100 is regularly examined for dam

How you begin your exercise program depends on your physical condition. If you have been inactive for several years or are severely overweight, start

WARM-UP and COOL-DOWNWarm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to ve

LIMITED WARRANTYWARRANTYMODEL 15-1100Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship under no

TABLE OF CONTENTSSafety Instructions ... 2Before You Begin ... 4Equipment Wa

PRODUCT PARTS DRAWING20FRONTBACK

PART# PART NAME QTYPARTS LIST21 1 Main Frame 1 2 Rear Stabilizer 1 3 Front Stabilizer 1 4 Seat Post 1 5 Meter Post 1

PART# PART NAME QTYPARTS LIST22 53 Left Crank 1 54 Right Crank 1 55 Left Pedal 1 56 Right Pedal 1 57 Linkage Bushing

Model Number: ... Serial Number: ...

THANK YOU FOR PURCHASING THEAirgometer 1100To help you get started, we have pre-assembled most of yourAirgometer 1100 at the factory with the exceptio

Thank you for choosing the Airgometer 1100. We take great pride in producing this quality product and hope it will provide many ho

Label is larger than actual sizeThis chart is provided to help identify the warning, caution, and notice labels on the Airgometer 1100.

94 Acorn Nut (M8 x 1.25) 460 Washer (ø16.2 x ø22 x 1.5mm) 261 Washer (ø10 x ø25.4 x 2mm) 296 Washer (M8)

Place all parts from the box in a cleared area and position them on the oor in front of you. Remove all packing materials from your area and place th

ASSEMBLY INSTRUCTIONS8STEP 3Connect the CONNECTION WIRE(38) to the SENSOR WIRE(39). Insert the METER POST(5) onto the MAIN FRAME(1) and secure with B

ASSEMBLY INSTRUCTIONS9WARNING: The SMALL CRANKS(44) require a special tool to remove once assembled. Read all of the following ASSEMBLY INSTRUCTIONS